There are two ways to install your XC Hangboard
1. Mounted directly on the wall
For mounting your XC Classic or ProEvo directly on the wall using screws and expansion plugs we recommend using 8mm diameter plugs designed perforated brick (e.g. Fisher SX or Fisher FU) with a hole depth of minimum 50mm.
XC Classic
5mm x 90mm screws for the 2 holes at the bottom and 5mm x 70mm for the 4 holes in the middle and at the top.
XC ProEvo
5mm x 90mm screws for the 2 holes at the bottom and 5mm x 90mm for the 4 holes in the middle and at the top.
2. Mounted on a plywood panel
First attach a panel to the wall. The area of your panel should be larger than that of your board (for example 80cm x 40 cm) and we recommend a thickness at least 30mm.
To mount the panel
Use 4 anchors either of the same type as indicated above with 5 mm x 90 mm screws, or using removable bolts such as the Fisher TA M 6 S/10 K or similar.
Once your panel is up you can fix your XC Hangboard to the panel at your desired height
XC Classic
5mm x 70mm screws for the 2 holes at the bottom and 5mm x 50mm for the 4 screws in the middle and at the top.
XC ProEvo
5mm x 70mm screws for the 2 holes at the bottom and 5mm x 70mm for the 4 screws in the middle and at the top.
